Posted in Greenhouse, Lessons Learned, Plans

Greenhousing

Posted on by rinnathebean

I know, I know, that is a thing of beauty! But seriously, that is the beginning of my pond in the greenhouse. Water has one of the highest capacities to hold heat of pretty any much material on Earth so it is a great way to keep a greenhouse warm at night when the sun isn’t shining and you haven’t figured out how the furnaces work and don’t really want to. So I made a pond – I dug a bit, I used approximately fifteen tons of cinder blocks (or at least that is how my back feels), I got a pond liner, and I filled it with some water.

And now I have to undo all of that.

Silly me figured that the location I was building it was a good one since it was close to the electrical outlets my dad put in (thanks Bernavel!), and I will need a pump in the pond to keep the water moving and fulfill my dreams of some crazy pond-based irrigation system.

img_0522

(And yeah I know – that is a super sweet phone charger/speaker set up there. Also the outlets point down to avoid any water situations, but don’t worry – they are GFCI. Safety First!)

But when the outlets were installed it was about mid-summer and that general area was plenty sunny. Now that it’s mid-fall that area is not so sunny. There are some pretty large pine trees close enough to the greenhouse on the southern side that it blocks some of the midday sun in part of the greenhouse. This is not an ideally situated greenhouse – if I were starting from scratch I would have oriented the greenhouse perpendicular to where it is now and set it further back from the trees, thus allowing the most sun absorption during the day. But you get what you get.

And what I got is a pond that is currently in the shade the better part of the day at the time of year when I need it most to retain heat.

Lessons learned:

  • Observe, then build. It would have been nice if I hadn’t been so dead set on putting the pond right near the outlet and actually realized that the sun was going to shift.
  • The sun moves! East/West and North/South. (I mean, yes, I obviously knew that, but when you are dependent on the sun for more than a pretty sunset over the city skyline it becomes a little more apparent)
  • Cinder blocks are heavy! But I used them because I have a ton of them and they are actually pretty useful. Next iteration of the pond I will probably dig down further into the ground and only use one layer of blocks around the edges.

And so the pond will be moved. Luckily I didn’t fill it all the way since I was going more for “proof of concept” and conceptually it is a pond in its ability to hold water – cold water.

(Note: it did drop below freezing last night and the low in the greenhouse was only 38 degrees. I’m not sure if the pond had anything to do with that, but at least my plants are still alive)

Posted in Greenhouse, Lessons Learned, Plans, Stubbornness

Fighting with Fans

Posted on by rinnathebean

I spent a lot of time messing with this greenhouse fan – a lot, like the better part of three days. I googled a million things, I texted my friend who is an electrical engineer, I twisted and untwisted and retwisted wires (luckily without electrocuting myself), I emailed the old owners, and I called the manufacturer. See, I was convinced that the vent in one of the greenhouses was installed backwards, or the fan ran the wrong way. The way the fan works it sucks hot air out of the greenhouse, but the vent opens outward, meaning that it doesn’t open automatically when the fan turns on. In fact it becomes harder to open it since the fan is sucking it closed. I rigged the door to swing open when the fan turns on, and I figured that there was something wrong with the set up of the fan and the vent since they didn’t work in the same way.

It turns out that I was wrong – the fans are only meant to run in exhaust mode and the vent is supposed to open against this flow because if the vent opens inward, a stiff wind could blow open the vent and ruin the temperature control. Apparently we are missing a crucial piece of the greenhouse set-up which automatically opens the vent right before the fan turns on.

So lessons learned?

  • Sometimes calling people is much easier than trying to research things yourself on the internet. Sure there was a lot of information out there, but some of it wasn’t relevant, was hard to understand, or was just plain wrong. Adding to that was the fact that I wasn’t even entirely certain what I was even looking for – was it the fan or the vent that was wrong? But one call to Dave at the ACME Fan and Greenhouse supply company had me straightened out.
  • Drawing electrical diagrams is HARD! This is not pretty:img_0484
  • Sometimes things don’t need fixing. Technically the fan/vent set up is completely correct, minus the missing part. But….

 

Lessons NOT learned:

  • I’m still not 100% convinced that it is correct! (I know, I am a very hard-headed, stubborn know-it-all!). I understand that it was correct at one point and possibly had all the parts it needed, but that is no longer the case. I could go out and buy one of those automatic openers and hook it up and it would work as intended, or I could figure out how to work with what I have.
  • I’m still going to try to kludgy this together somehow. Maybe flip the vent for the summer and wedge it closed for the winter? Maybe some Rube Goldberg machine can open that vent when the fan turns on? Maybe automatic venting that doesn’t even need a fan?
  • Ideally the fan will be unnecessary and I would like to not depend on these automatic thingamajigs. Not because I’m a Luddite or hate technology, but because they fail and are hard to fix and make me angry (and the irrigation system battery died and killed all my squash babies earlier this summer). I figure that people managed at one point without all those things, and I can figure out how to as well. Living part time in Philly does make it more complicated, but that sounds like a challenge…
Posted in Farm Truck, Plans, the MUD

In the beginning…

Posted on by rinnathebean

That’s me with our ’99 Ford Ranger we got as a farm truck. Promptly after acquiring it E and knocked off one side mirror and got it stuck in the mud on the back part of the property – for two weeks! I spent a good five days attempting to dig it out of the mud, literally covered in so much mud I looked like a swamp beast. Finally we gave in and called a tow truck. The first guy took one look at where it was stuck and told me that his truck would get stuck in the mud before he could even get to where our truck was. Luckily our neighbor down the street who runs the auto body shop in town said that he could get it out once he fixed his tractor and got his brush-hog attached. E and I had to head to a wedding out of town, but when we came back, there it was, the Ranger, sitting in the driveway covered in mud.

I figure this is a fitting beginning for the Jugtown story or whatever this blog will end up being. I imagine trial and error, lots of errors, will play a large part in our Jugtown story. For example – now I now that I should never attempt to drive the truck back in that part of the property EVER! (seriously it is a swamp and if I had gotten five feet further I would have run smack into a raised wooden pathway and probably busted up the truck even more). Anyone who knows me will tell you that I take everything as a dare, telling me not to do something just makes me want to do it even more. I also will rarely take other people’s advice on what or how something should be done. It’s probably not the greatest character trait, but it does make me willing to try things others would probably not. A certain amount of foolishness (or gung-ho-ness if you’re feeling generous) is necessary for a lot of the things I want to do or have done in life. I have plans, BIG PLANS.