It looks so tropical in there, right?! It sure feels tropical because it is humid as all hell in the greenhouse. Like so humid it is literally raining in there. The sun was out in full force today and someone (no idea at all who that could be) apparently didn’t twist the wires to the fan together enough and the fan quit working!
(You can see the untwisted white wires up at the top, along with the rogue wire nut at the bottom. Don’t get me started on the black wire connected to the white wire in there, seriously I have no idea, but it works)
So during the day at some point it got up to almost 105 degrees, leading to the pond relocating onto the greenhouse film making it steamy and rainy inside. So, I did some research about this humidity issue, and I’m almost convinced it is an issue, but also not convinced that it needs an immediate or high-tech resolution. Apparently most plants don’t like a lot of humidity – it messes with their respiration and can lead to the spread of diseases, especially fungus and mildew issues. I also am pretty sure it’s not great for the materials in the greenhouse, mainly the electrical work in there, but that is less of a concern.
The goal of this particular greenhouse is to be somewhat tropical, so the humidity might not be that big of an issue. I assume that some plants don’t mind the humidity and would enjoy the steaminess. The drawback of this is that I want to grow tomatoes and other veggies in there and I know that tomatoes and squash are especially susceptible to fungus/blight and powdery mildew. I could try to make some sort of division between the pond area and the veggie areas, but that seems counter-productive to the whole heat-sink idea of the pond, and I have four other greenhouses, so if I was going to do that, I should just use a different one.
A couple of commercial/industrial solutions exist: non-condensing greenhouse glazing, condensation reducing sprays, circulation fans, and dry-air heat. I’m not particularly interested in trying out most of these. I know I need more circulation, but I’m trying to balance that with keeping the heat in, so I need to try to figure that out. I also could keep the water in a container that didn’t allow evaporation, but I really like the idea of a greenhouse pond, so I’m really set on making this work. So…
Solutions I am willing to try that might work:
- The greenhouse glazing is double thick and there is a blower which can inflate between the two layers and allow for better insulation leading to less of a temperature differential between the inside and outside air which is a large cause of condensation.
- I could try to come up with something that could force the condensation to happen in a certain place – a metal tube or some sort of upside-down pointy thing? This would hopefully lead to less dripping in random areas and if possible, reduce the humidity.
- Venting – yes I know I need more of this, but my highest hope is that maybe this isn’t an issue at all. Maybe if the fan had been working the humidity would never have risen too far to start with and we would all be millionaires… yeah…